JP-8080 User Guide

JP-8080 guide / Sequencing

Sequencing the JP-8080, all in one place.

The JP-8080 has no step sequencer of its own, but it was built to be sequenced. Here is how owners do it, with its own pattern tools, from a DAW, or from hardware sequencers and grooveboxes.

Three ways to sequence

01

Onboard

The Arpeggiator and Beat Patterns play the notes, and Motion Control shapes them over time.

Best for: fast ideas, trance and techno patterns, and playing live with nothing else attached.

Onboard sequencing
02

From a DAW

A computer sends notes and controller data to the JP-8080 through a MIDI interface.

Best for: full songs, detailed editing, recording knob moves, and recalling every setting.

DAW setup
03

From hardware

A groovebox, MPC style sampler or step sequencer sends notes over MIDI.

Best for: computer free studios, live sets, and hands on pattern writing.

Hardware setup

Sequencing Guide

Whichever way you work, the MIDI basics are the same.

A visitor asked a fair question: how do people actually sequence this synth? Most owners drive it from a DAW, but plenty of people use its own pattern tools, and many pair it with a hardware sequencer or groovebox. The details are spread across several chapters of this guide, so this page gathers them together and fills in the parts that were missing.

Onboard: the Arpeggiator and Beat Patterns

When people talk about the JP-8080's internal sequencer, this is what they mean. Hold a chord and the Arpeggiator turns it into a repeating pattern. The Beat Patterns go further, adding rhythm, accents and note order, with families such as SEQUENCE, ECHO, STRUMMING, WALKING BASS and PERCUSSION.

  • Turn on Hold so the pattern keeps playing after you let go. You can then use both hands on the knobs.
  • Gate Time and Accent do as much for the groove as the pattern itself.
  • The Arpeggiator also responds to notes arriving over MIDI, so a DAW or hardware sequencer can play a chord and let the JP-8080 turn it into a pattern.
  • Set the JP-8080 to follow external MIDI Clock and the patterns lock to the rest of your setup.

Full details: Chapter 12, Arpeggiator and Chapter 12A, Beat Patterns, which ends with an exercise on building a trance sequence.

Onboard: Motion Control

Motion Control records your knob movements and plays them back in a loop, which works like a parameter sequencer. Record a filter sweep over an arpeggio and the pattern changes on its own, bar after bar. Motion Control can follow the tempo too, so the movement stays in time with the arpeggio and with external clock. Remember to press WRITE if you want the motion saved with the Patch.

Full details: Chapter 10, Motion Control.

Sequencing from a DAW

This is how most owners work today, and it gives you the most control.

  1. Connect your MIDI interface's MIDI OUT to the JP-8080 MIDI IN. If you want to record knob moves, also connect the JP-8080 MIDI OUT back to the interface's MIDI IN.
  2. Connect the JP-8080 audio outputs to your audio interface, so you can hear and record it.
  3. Set the MIDI track in your DAW to the same channel as the JP-8080 part you want to play.
  4. Turn on MIDI Clock output in the DAW and set the JP-8080's MIDI Sync setting to follow it. The Arpeggiator, synced LFOs, delay and Motion Control will then follow the song tempo.
  5. Put a Program Change at the very start of the track so the right Patch or Performance loads every time you press play.
  6. Record knob moves as Control Change data, then edit them like any other automation.

If you use the Arpeggiator inside a DAW song, the simplest approach is to record the JP-8080's audio rather than trying to capture the arpeggiated notes as MIDI. The DAW then only needs to send the held chord.

More on channels, Program Change and MIDI Clock: Chapter 15, MIDI Implementation.

Sequencing from Hardware

The JP-8080 came out in an era of hardware studios, and it still sits well with grooveboxes such as the Roland MC series, MPC style samplers, Elektron machines and dedicated step sequencers. Older hardware sequencers work just as well, because the JP-8080 only needs standard MIDI.

  1. Connect the sequencer's MIDI OUT to the JP-8080 MIDI IN. To add more instruments, chain them from the JP-8080 MIDI THRU, or use the sequencer's other MIDI outputs if it has them.
  2. Choose one clock master. Usually that is the sequencer or groovebox. Set the JP-8080 to follow external MIDI Clock.
  3. Set the sequencer track's MIDI channel to match the JP-8080 part.
  4. Store a Program Change with each pattern or song so the JP-8080 changes sound when the pattern changes.
  5. If your sequencer can send Control Change messages on a track or per step, use them to move JP-8080 parameters in time, for example a different filter setting on every step.

A nice hybrid is to let the hardware sequencer play only the root notes or chords and let the JP-8080 Arpeggiator do the rest. The sequencer keeps the song structure and the synth adds the movement.

Two Parts, Two Lines

A Performance holds two Patches, an Upper part and a Lower part. Each part has its own MIDI channel, which means one JP-8080 can play two different lines from a sequencer, for example a bass on one channel and a lead on the other.

Example two part setup
Part MIDI channel Sequencer track
UpperChannel 1Lead or arpeggio
LowerChannel 2Bass line

Keep the voice count in mind. The JP-8080 has ten voices, shared between both parts. A big pad on one part can steal notes from the other, so busy two part sequences work best when one part is a single note bass or lead.

More on parts and key modes: Performance vs Patch.

Sequencing the Voice Modulator

The vocoder and Voice Modulator need two things at once: audio coming into the external input, and notes telling the JP-8080 which pitches to sing. A sequencer is perfect for the notes. Program the chord progression in your DAW or hardware sequencer, feed a voice or drum loop into the input, and the JP-8080 plays the progression with that sound.

Full details: Chapter 14, Vocoder and Voice Modulator.

When Something Goes Wrong

Common sequencing problems
Problem Likely cause Fix
No sound from the sequence The track and the JP-8080 part are on different MIDI channels, or the audio outputs are not connected Match the channels and check the audio cables. MIDI carries no sound by itself.
Notes play twice The DAW is echoing MIDI from the JP-8080 back to it Turn off MIDI echo or thru for that track, or turn Local Control off
Arpeggio drifts out of time The JP-8080 is using its internal tempo Set it to follow external MIDI Clock and make sure clock output is on in the sequencer
Wrong sound when the song starts No Program Change at the start Add one at the first bar of the track or pattern
Notes cut off in busy passages All ten voices are in use Shorten release times, thin out chords, or move one part to a single note line
Recorded knob moves do not play back The Edit Transmit and Receive mode was changed after recording Use the same mode for recording and playback

For the exact menu names and settings, keep the Roland JP-8080 Owner's Manual close by. More fixes are in Troubleshooting.

Share Your Setup

Do you sequence your JP-8080 with an MPC, an MC groovebox, an Elektron box or something older? I would love to hear how you have it set up, and I may add it to this page. Write to contact@jp8080.org.

Summary

  • The JP-8080 has no step sequencer, but the Arpeggiator, Beat Patterns and Motion Control cover a lot of ground.
  • A DAW or a hardware sequencer can play it over MIDI, and the setup is the same for both.
  • Match the MIDI channel, share one clock, and send a Program Change at the start.
  • The Upper and Lower parts can receive on separate channels, so one JP-8080 can play two lines.
  • Ten voices are shared between both parts.
  • Record MIDI first and audio last.